Laerdal SimView User Manual
Page 10
Advertising
10
Figure 10 The Profile editor setup for the SimMan3G
Enable Use video server (AVS)
Insert the IP address, (“localhost” or “127.0.0.1” is not allowed) for the PC running the Instructor
Application.
Enable monitor recording
Set the quality to High, screen size on patient monitor not to exceed Full HD (1920x1080 pixels)
Use the Save as.. to save the profile and the press Close
You must the start a new session in order to use the new profile.
Tip! When SimMan3G starts, you can make sure that the profile you saved is the one that is used for the
session:
Figure 11 The SimMan3G start screen showing the profile used
Advertising