Operating the ip cameras – Laerdal SimView User Manual
Page 33
33
Operating the IP cameras
6.9
The PTZ (Pan Tilt and Zoom) cameras can be operated from the View & Setup page during watching and
recording. Moving the cursor into the picture frame will add the control buttons as well as the top banner
with presets and Operator Mode.
Note! The PTZ camera controls in SimView only operate with the supported AXIS cameras and do not
work with analog cameras.
Note! The built in controls in SimView are mainly to be used for adjusting the position of the cameras, not
for real time control during a session.
You can set new preset position by clicking the star button once you have positioned the camera where you
want it, you will be asked to enter a name for the position. You can have up to 5 different presets; they will
be shown at the top banner in the video window when you have the cursor placed inside the window. The
Operator button is for opening the AXIS control in a new browser window.
Note! You will only have the control buttons if you are logged in as the administrator or instructor.
Figure 72 Camera control buttons for PTZ cameras.
6.9.1 Operator Mode
The Operator Mode is used for real time control of the PTZ. Use this option if you need to control video in
real time during a session.