Laerdal SimView - Manual (Page 19)

19
Figure 32
Figure 33
Figure 34
5.2.9 Patient Monitor
To add the Instructor Applications Patient Monitor, start SimView and login as Administrator.
1. From the Home screen click the VIEW & SETUP (1)
2. Click the Add equipment (2) button.
3. Click the in the Devices (3).
4. Select the Patient Monitor by clicking in the list window (4 and 5).
5. Insert the correct IP number in the IP address (6) field, the other fields are pre-filled and should not
be changed.
6. Click the Add equipment (7).
7. If you want to change the IP address later enter the new address in the field (8)
8. Press Save changes (9).
9. Later changes in IP address can be done by changing the address in the address field (8) and save
changes.