Laerdal SimView - Manual (Page 46)

46
Q: How do I reset the AXIS camera to its factory defaults?
A: To reset the camera to the original factory default settings, use the control button and the restart button
on the side of the camera as described on the next pages.
AXIS P5534:
Using the control and restart buttons will reset all the parameters, including the IP address, to the factory
default settings:
1. Remove the top cover.
2. Press and hold the control button and the restart button at the same time.
3. Release the restart button but continue to hold down the control button.
4. Continue to hold down the control button until the status indicator color changes to amber (this may
take up to 15 seconds).
5. Release the control button.
6. When the status indicator changes to green (which may take up to 1 minute), the process is complete and
the camera has been reset. The unit now has the default IP address 192.168.0.90
7. Put the top cover back in its original position.
It is also possible to reset parameters to the original factory default settings via the web interface. For more
information, please see the online help or the User’s Manual available from the AXIS Network Video
Product CD supplied with this product.
AXIS M3204:
This will reset all parameters, including the IP address, to the Factory Default settings:
1. Disconnect power from the camera.
2. Press and hold the Control button and reconnect power.
3. Keep the Control button pressed until the Power indicator flashes amber (this may take up to 15
seconds).
4. Release the Control button. When the Power indicator displays green (which can take up to 1 minute)
the process is complete and the camera has been reset.
It is also possible to reset parameters to the original factory default settings via the web interface.
For more information, please see the online help or the user’s manual.