Laerdal SimView - Manual (Page 3)

3
1 Introduction
The User Guide includes comprehensive step-by-step instructions and illustrations for using SimView.
All supplied user manuals and labeling from original manufactures should be followed.
The SimView user guide does not supersede those from the original manufacturer.
Check www.laerdal.com for newest version of this User Guide.
Before you start installing 1.1
1. Have all actions from the “Presales Questionnaire and site survey” been solved successfully?
2. Is the Network infrastructure ready with the camera(s) connected?
3. Unpack the boxes and check that everything is delivered and undamaged, so that you have all the
needed parts ready before start.
4. Read the documentation before you start.
Figure 1
Quick installation overview 1.2
The following is a quick overview of the steps needed to setup the SimView system.
They are only relevant if you are not having a Laerdal Representative to assist you with the installation.
1. If you ordered the cameras together with the SimView, the first thing to do is to install the cameras
in the planned places and connect them to the Ethernet, if you already have the cameras in place
then go to step 2.
2. Install the PC and connect it to the Ethernet.
3. Connect keyboard and mouse to the PC.
4. Connect your USB web-camera if needed to a USB port on the PC.
5. Connect the microphone to the PC.