Laerdal SimView - Manual (Page 18)

18
Figure 28
Figure 29
5.2.8 Audio
To add a microphone to the simulation setup, start SimView and login as Administrator.
To add the Windows default microphone or audio input that has been set-up under the recording tab in the
“Windows Sound Control Pane”:
1. From the Home screen click the VIEW & SETUP (1)
2. Click the Add equipment link (2).
3. Select the Microphone by selecting it from the drop down list (3 and 4)
4. Select the microphone you want to use from the drop down list (5 and 6).
5. Click the Add equipment (7) button to update and exit.
6. Choose the Input mode to suit your setup (8).
Figure 30
Figure 31