Laerdal SimView - Manual (Page 29)

29
Figure 62
Note! If you already are logged in because of previous activity, you may not have to log in again.
Inserting comments during a simulation session 6.7
You can enable the function “comments on the fly” by opening the server settings and adding a check mark
in the checkbox for Enable Comments.
Figure 63 The server settings.
When the Enable Comments has been enabled you get a new link in the top banner Add live comments.
Figure 64 How to open a comment window.
Note! If you just click on the Add live comments the window will open in the same window as you used for
controlling the server.
You add comments to simulations by using a web browser from anywhere using a link looking like this:
<SimViewServerName>
/Comment, where <SimViewServerName> is the servers IP address or
computer name.
This will open a window for comments entry, it will works on any platform with an updated web browser.