Laerdal SimView - Manual (Page 24)

24
Note! The students, or users, cannot edit the simulations.
Tip! The picture shown together with the simulations is a snapshot from the first camera added during initial
configuration; i.e. the leftmost enabled camera tab in the Equipment configuration.
Besides being able to view the simulation, you also have up to 4 options depending on the type of user type
if you click the triangle in the bottom right corner:
 Delete the simulation, if it is not relevant anymore and for freeing up space on the hard drive.
 Export the simulation.
 Share the simulation.
 Protect the simulation. Can also be done by clicking the lock icon in the left corner.
For more information on the last two topics see chapter 6.11 Sharing simulation recordings.
The View & Setup window 6.3
The options available on the View & Setup screen depend on the user’s role: administrator, instructor or
user.
The View & Setup page also gives administrator the possibility to change the configuration of SimView.
The View & Setup page shows the images captured from the active camera, you will see images from all
active cameras if you have more than one active camera.
Figure 50 The two type of View & Setup screens
If you are an administrator you will have the possibilities shown to the left otherwise the window at the right
is for the other user types.