Laerdal SimView - Manual (Page 4)

4
2 Cautions and warnings
• By using this product, Laerdal® Medical does not condone the use of this system for violating any
government, state or local laws or personal rights.
• This product contains software that may be installed to other computer systems that may allow
remote visual and audio monitoring. Allowing access to private networks and the recording of
unannounced conversations may be a violation of personal rights. It is recommended that individuals
in the areas of recording equipment be made aware of the installed equipment and to the fact that
there conversations and activities could be viewed and recorded without notice.
• It is not advised to use this system as a means of physical security for the protection of public or
private property.
• Laerdal® Medical will not be responsible for loss or stolen property due to the use nor failure of
operation of this equipment.
• Read understand, and follow all equipment instructions, safety warning and guidelines before
operating SimView and all associated equipment.
• Do not use cables or connectors with bent pins or visible damage.
Warranty 2.1
Please refer to the enclosed printed Laerdal® Global Warranty or www.laerdal.com for terms and
conditions.
3 Important Note
SimView Security and Privacy concerns 3.1
This document is meant to address concerns regarding SimView privacy and security.
Whose responsibility is it to secure the SimView Server? 3.2
The SimView server system is by default not configured with any firewall or antivirus software.
It is the customer's responsibility to install such software and to include the PC in the normal Domain
policies on the network. Furthermore, it is also the customer's responsibility to keep the PC's updated with
the latest security patches.
This is due to the fact that once the PC is installed at the customer site; Laerdal has no control over the PC
and therefore cannot be responsible for maintaining security.
Anti-virus and Firewalls 3.3
The PC is not supplied with an anti-virus program. Windows firewall is not activated by default. It is the
customer’s responsibility to protect the simulation system components from unauthorized access.
Tip! For more information on changing the firewall setting see the maintenance chapter (7).
Privacy 3.4
Content stored on the SimView server cannot be accessed without proper login credentials. Three types of
login exist to get access to the stored simulations. One type grants access to change the configuration,
delete files and edit logs and the other types only grants access to view the simulations and live video feed
without being able to change the configuration.
You can create as many users as needed on the system.