Applied Motion BLuAC5-Q - Manual (Page 44)

44
BLuAC5 S/Q Hardware manual
920-0049 Rev. C
12/8/2014
Sine commutation IGBT. 16 kHz PWM.
90 - 260 VAC input
5A continuous, 15A peak
Step & Direction: differential, optically isolated, 5V logic. 330
ohms internal resistance.
0.5 µsec minimum pulse width. 2 µsec minimum set up time for direction
signal.
All other digital inputs: optically isolated, 12 - 24V logic. 2200 ohms.
Maximum current: 10 mA
±10VDC, 12 bit ADC
With Expanded I/O board: 0 to 5 VDC, 1K - 10K recommended imped-
ance. 10 bit ADC
Photodarlington, 100 mA, 30 VDC max. Voltage drop: 1.2V max at 100
mA.
24VDC @ 100ma
26C31 line driver
2.70 x 4.848 x 7.80 inches overall. 2 lb 3.1 oz
Ambient temperature range: 0 to 40° C.
Technical Specifications
Amplifier
Digital Inputs
Analog Inputs
Outputs
24V Output
Encoder Output
Physical
Mating Connectors and Accessories
Mating Connectors
Motor/Regen: Mating connector included. Phoenix P/N 1767012.
AC Input: Mating connector included. Phoenix P/N 1767025.
Brake: Mating connector included. Phoenix P/N 1766990.
RS-485: Mating connector included. PCD P/N ELVP05100.
I/O: DB-25 male. Mating connector included. AMP P/N 747912-2.
Shell Kit AMP P/N748678-3.
Motor feedback: HD-15 male. Norcomp P/N 180-015-102-001. Shell Kit AMP P/N 748678-1.