Applied Motion BLuAC5-Q - Manual (Page 45)

45
BLuAC5 S/Q Hardware manual
920-0049 Rev. C
12/8/2014
Accessories
Motor Cables for Applied Motion “A”, “N” and “M” series servo motors:
BLUMTR-FA-04, four foot shielded and filtered cable
BLUMTR-FA-10, ten foot shielded and filtered cable
BLUMTR-FA-20, twenty foot shielded and filtered cable
Motor Cables for Applied Motion “J” series servo motors:
3004-307-3M, nine foot shielded and filtered cable
Encoder Cables for Applied Motion “A”, “N” and “M” series servo motors:
BLUENC-CA-04, four foot shielded cable
BLUENC-CA-10, ten foot shielded cable
BLUENC-CA-20, twenty foot shielded cable
Encoder Cables for Applied Motion “J” series servo motors:
3004-301-3M, nine foot shielded cable
Breakout Box for IN/OUT Connectors:
BOB-1, for IN/OUT 1, includes cable
BOB-2, for IN/OUT 2, includes cable (sometimes known as “BABS” because it’s a female
version of the BOB-1)
Screw Terminal Connectors that mate directly to the IN/OUT connectors on the front panel of
the drive:
Phoenix Contact P/N 2761619 (for IN/OUT 2) and 2761622 (for IN/OUT 1)
This connector is not available from Applied Motion.
You must purchase it from a Phoenix distributor.
Mating Cable for IN/OUT connectors with “flying leads”
Black Box P/N: BC00702
This cable is not available from Applied Motion. You must purchase it from Black Box .
Useful for custom wired applications. This shielded cable has a DB-25 connector on each
end. If you cut it in half it will provide 3 foot “DB-25 to flying lead cables” for both IN/OUT1
and IN/OUT 2.
It’ll be easier to wire if you get the cable color chart from Black Box’s website .
Surge Protector with Line Filter:
For 120VAC: Leviton 51010-WM
For 220VAC: Leviton 51240-WM
External Regen. Resistor Assembly
Specifically designed for the BLuAC5: RA-100 available from Applied Motion Products.