Doremi AccessLink - Manual (Page 36)

FAL.OM.002372.DRM Page 36 of 62 Version 1.6
Doremi Labs
Figure 38: Receiver Select Channel Assignment Screen

You can select from one of the following options:
o Ch. 1a (HI)
o Ch. 2a (HI)
o Ch. 1b (VI-N)
o Ch. 2b (VI-N)
o Ch.1 (Stereo)
o Ch.2 (Stereo)
 The selection you make will be based on your Fidelio wiring setup and your Digital
Cinema Player's audio mapping. In other words, assuming that you use the audio wiring
setup as described in this manual, and the Digital Cinema Package playing back has
been mastered with the HI audio track on channel 7 and the VI-N audio track on channel
8, your Digital Cinema Player's audio mapping will be configured similar to the
recommendations in Figure 42.
 Selecting Ch.1a will provide the audio channel 7 in L&R mono to the receiver.

Selecting Ch.2a will provide the audio channel 15 in L&R mono to the receiver.
 Selecting Ch.1b will provide the audio channel 8 in L&R mono to the receiver.

Selecting Ch.2b will provide the audio channel 16 in L&R mono to the receiver.
 Selecting Ch.1 (Stereo) will provide the audio channels 7 & 8 to the receiver.
(7 to headset Left, 8 to headset Right).
 Selecting Ch.2 (Stereo) will provide the audio channels 15 & 16 to the receiver. (15 to
headset Left, 16 to headset Right).

After you have selected your theater and channel assignments, the Receiver can now be
removed from the configuration port and handed to the customer/patron.