Doremi AccessLink - Manual (Page 5)

FAL.OM.002372.DRM Page 5 of 62 Version 1.6
Doremi Labs
WARNING
THIS DEVICE MUST BE GROUNDED
IMPORTANT
Power requirements for electrical equipment vary from area to area. Please ensure that the
Fidelio with AccessLink meets the power requirements in the surrounding area. If in doubt,
consult a qualified electrician or a Doremi Labs dealer.
PROTECTING YOURSELF AND THE FIDELIO WITH ACCESSLINK
Only a qualified professional can install the AccessLink. Only use the antenna provided by
Doremi Labs.
The AccessLink shall be mounted with a separation distance of at least 20cm from any person
(
L’AccessLink doit être installé à une distance d’au moins 20cm de toute personne).
The CaptiView transmitter (if connected to the AccessLink), or any other antenna, shall at least
be 20cm away from the AccessLink antenna
– usage of a USB extension cable will be needed
for the CaptiView transmitter connection.
There is a possibility to have noise conducted to Ethernet, Audio and Serial cables. Use cables
shorter than 3 meters whenever possible and route cables away from powerful RF noise
sources and power cables.
Never touch the AC plug with wet hands. Always disconnect the Fidelio with AccessLink from
the power supply by pulling on the plug not the cord. Allow only a Doremi Labs, Inc. dealer or
qualified professional engineer to repair or re-assemble the Fidelio with AccessLink. Apart from
voiding the warranty, unauthorized engineers might touch live internal parts and receive a
serious electric shock. Do not put, or allow anyone to put any object, especially metal objects,
into the Fidelio with AccessLink. Use only the provided AC power supply. Never use a DC
power supply.
If water or any other liquid is spilled into or onto the Fidelio with AccessLink, disconnect the
power and call a Doremi dealer. The unit must be well ventilated and away from direct sunlight.
To avoid damage to internal circuitry, as well as the external finish, keep the Fidelio with
AccessLink away from direct sources of heat (heater vents, stoves, radiators). Avoid using
flammable aerosols near the Fidelio with AccessLink. They can damage the surface area and
may ignite. Do not use denatured alcohol, paint thinner or similar chemicals to clean the Fidelio
with AccessLink. This can damage the unit.
Modification of this equipment is dangerous and can result in the functions of the Fidelio with
AccessLink being impaired. Never attempt to modify the equipment in any way. In order to
ensure optimum performance of the Fidelio with AccessLink, select the setup location carefully
and make sure the equipment is used properly. Avoid setting up the Fidelio with AccessLink in
the following locations:
 In a humid or dusty environment.
 In a room with poor ventilation.
 In an extremely hot or cold environment.