Xtramus NuStreams-P9M V2.1 - Manual (Page 17)

17
System Configuration/Information
Function Control Button Action LCD Display
Entering System
Setting Menu
Move the ＞ cursor to “System Setting”, and
press
button. NuStreeams-P9M will prompt
you to input the system password. The default
password is ▲/+ ▲/+ ▲/+ ▲/+. Press
button after inputting the password to enter the
test setting menu.
Buzzer
Choose “Buzzer” from “System Setting” menu
list, and press
button. The select cursor “＞”
will be changed to “→” icon. Using ▲/+ or ▼/-
buttons to set Buzzer function On or Off, and
press
button to apply the changes. System
will make a buzz sound whenever you press
a button if this function is ON.
Password On/Off
Choose “Password” from “System Setting”
menu list, and press
button.
You can set the Password function On/Off by
selecting Password: On/Off. Using ▲/+ or ▼/-
buttons to set Password function On or Off.
Setting New
Password
Choose “Password” from “System Setting”
menu list, and press
button.
You can change system password (Default
Password: ▲/+ ▲/+ ▲/+ ▲/+) under Setting
Password menu.
Password is a set of 4-button combination
using ▲/+, ▼/-, ►Run1, ►Run2, and ►Run3
buttons.
Please input your old password under “ORG: “,
and input your new password under “New: “.
System Date/Time
Choose “Date/Time” from “System Setting”
menu list, and press
button.
You can adjust system date and time by
pressing ▲/+ or ▼/- buttons, and
button to
apply the changes you’ve made.
Load System
Default Value
Choose “Load Default” from “System Setting”
menu list, and press
button.
System will ask if you really want to set all
system settings to default. Press ▲/+ to
confirm, or ▼/- to cancel.
XTRAMUS TECHNOLOGIES
®
E-mail: [email protected]
Website: www.Xtramus.com