Xtramus NuStreams-P9M V2.1 - Manual (Page 9)

9
1.4. NuStreams-P9M LED Status
The table down below contains NuStreams-P9M’s front panel LED status and their meanings.
LED Status Description
Power On NuStreams-P9M is on
Off NuStreams-P9M’s CPU system down
On NuStreams-P9M CPU system initializing
Green Light Blinking NuStreams-P9M’s CPU system active and running
SYS
Yellow Light On NuStreams-P9M is not starting properly
USB Green Light On NuStreams-P9M is connecting to PC via USB cable
10M/100M Green Light On NuStreams-P9M’s connection with DUT is active
Green Light On WAN connection established and standing-by
Link/ACT
Green Light Blinking Test packets sending via WAN ports
Static IP Blue Light On DUT WAN connection is set to Static-IP
WAN
DHCP Amber Light On DUT WAN connection is set to DHCP
Pass Green Light On DUT test passed
Fail Red Light On DUT test failed
Green Light On NuStreams-P9M’s connection with DUT is active
LAN
Link/ACT
0 ~ 7
Green Light Blinking The corresponding LAN port is performing test
1 Auto-Negotiation
2
Residential Gateway: Waiting ARP Reply
Switch: Sending Learning Packets
3 Starting DUT tests
STEP
4
Green Light On
Test complete, generating test results and report
XTRAMUS TECHNOLOGIES
®
E-mail: [email protected]
Website: www.Xtramus.com