Adept AnyFeeder User Manual
Page 23
Mechanical Installation
Adept AnyFeeder User’s Guide, Rev. B
23
Moving the Adept AnyFeeder to the Mounting Location
1. Find a co-worker to help you move the Adept AnyFeeder.
2. Lift the Adept AnyFeeder by the handles shown in
.
Figure 2-4. Handles for Lifting/Moving the Adept AnyFeeder
3. Move the Adept AnyFeeder to the prepared mounting location.
4. Bolt the Adept AnyFeeder to the mounting location by inserting at least four (4)
M6 x 16 mm Allen screws with washers and lock washers through the holes in the
feeder’s mounting rails (use at least two screws in each mounting rail).
WARNING:
Two people must lift and move the Adept AnyFeeder to
the prepared location. Lift the Adept AnyFeeder only by holding it at
the base housing at the handles indicated below.