API Audio The Channel Strip - Manual (Page 32)

8.0 AC Power
The Channel Strip can operate on either 115volt or 230volt 50-60Hz AC power.
The AC power is supplied via the IEC connector on the rear panel.
Operating voltage is determined by the Voltage Selector switch.
Voltage Selector Switch: Selects operating voltage
• 115 volts
• 230 volts
The fuse holder is located on the rear panel.
• 0.5A/0.25A 250V
The AC power switch for The Channel Strip is located at the lower right of the API
logo on the front panel.
• A blue LED indicator illuminates when the unit is on.
31