Appendix, I. 512c preamplifier specifications, Ii. 527 compressor specifications – API Audio The Channel Strip User Manual
Page 33
APPENDIX
i.
512C Preamplifier Specifications
ii 527
Compressor
Specifications
iii. 550A
Equalizer
Specifications
iv. 325
Line-Driver
Specifications
i. 512C
Preamplifier
Specifications
Rear Connector:
XLR MIC Input
Balanced ¼” TRS LINE Input
Front Connector:
HI-Z ¼” Unbalanced Instrument Input (INST)
Gain Range:
MIC: 14dB min. 68dB max.
INST: 14dB min. 50dB max.
Maximum Input Levels:
MIC: +8dBu
INST: +36dBu
Input Impedance:
MIC: 1500 Ohms (150 Ohm mic)
INST: 20 K Ohms
Clipping Level:
+30dBu
Output Peak Indication:
+27dBu
Frequency Response:
+0, -.3, 30Hz to 20kHz
Noise:
Equivalent Input Noise: MIC:-129dBm; INST: -125dBm
Actual Metered Noise: MIC: -95dBm; INST: -90dBm
Distortion:
Less than .05% @ +4dBu out, Less than .1% @ +28dBu out
ii. 527
Compressor
Specifications
Attack Times:
1 millisecond to 25 milliseconds (typical)
Release Times:
0.3 seconds to 3 seconds (typical)
Compression Ratios:
1:1 to ∞:1
Threshold Control Range: +10dBu to -20dBu
THRUST® Filter:
-10dB/Decade slope, unity @ 1kHz
Frequency Response:
+/- 1dB 20Hz to 20kHz
Total Harmonic Distortion: < .2% THD, any level below clipping, any compression setting
Signal to Noise:
Unweighted -100dB below clipping
([email protected]% distortion, no compression)
Metering:
10-segment red LED: Gain Reduction scale; -1.5dB to -23dB
(negative illumination indicator)
32