Cpld and fpga – Artesyn ATCA-8310 Installation and Use (May 2014) User Manual
Page 364
Advertising

CPLD and FPGA
ATCA-8310 Installation and Use (6806800M72E)
364
8.2.3.12.2 Watchdog registers
Interrupt mask register
Failover mask register. When watchdog expires, a failover is initiated if unmasked
One Watchdog for SPP
One Watchdog for GPP
The timeout is programmable from 1ms 2 -1 or about 4 Minutes and 22 Seconds
8.2.3.12.3 Software failure injection registers:
Software can request failover when writing a defined value
Interrupt mask register
Failover mask register
8.2.3.12.4 General
Active/standby status
Partner blade present status
Force status of healthy signal
Interrupts:
–
Role change requested
–
Partner extracted
–
Interrupt status/mask bits
Advertising
This manual is related to the following products: