Artesyn ATCA-8310 Installation and Use (May 2014) - Manual (Page 89)

Functional Description
ATCA-8310 Installation and Use (6806800M72E) 89
4.5 Ethernet Network (ETH)
The Ethernet-part of the ATCA-8310 connects the DSP-Farm as well as the general purpose
processor to Base and Fabric interface and the ARTM. For this purpose a suitable switch device
is used. This switch is configured by the service processor.
Figure 4-6 Ethernet Overview

BCM 
56624 
DSP farm0(onboard)
GPP CPU
Z
o
ne3

Z
o
ne2

MCF 
52232 
UC

2*SGMII
2*SGMII
BI 
BI 
2*XAUI
6*SGMII
XAUI ARTM
SPP CPU
XAUI
2*PCIe
FP
RL

BCM 
5482 
5 *DualͲPHY
SGMII toRGMII
SGMII
2*SGMII
DSP farm1module1
BCM 
5482 
5 *DualͲPHY
SGMII toRGMII
DSP farm2module2
BCM 
5482 
5 *DualͲPHY
SGMII toRGMII
13*SGMII
13*SGMII
10*SGMII
88E 
6161 
FPGA 
100B ͲT
2* RS232
2* RS232
P4080 
1* RS232
GPP