Avery Dennison Monarch 9855 Operator Handbook - Manual (Page 14)

1-6 Operator's Handbook
U s i n g t h e Co n t ro l P an el
The control panel has a two-line LCD display, 2 status lights, and five
buttons. The control panel displays error codes/messages, and allows you
to setup/configure the printer.
Printe r Sta tus Lights
Power:
The printer shows a steady green light
when it is on.
The Power light blinks when the battery
needs to be recharged (only on
battery-powered/cart models).
Fault:
The printer shows a blinking amber
light when there is a printer error.
Button Func tions
Feed/Cut:
♦ Prints a label in the on-demand mode.
♦ When the printer is online, feeds a blank label if
there is no print job.
♦ Prints a label with error information that is useful to
your System Administrator if an error is displayed.
♦ When the printer is online, cuts the supply when
pressed and held for two seconds if a knife is
installed.
♦ When the printer is offline, changes the displayed
value by one or 10.
Enter/Pause:
When the printer is online, pauses the current print job or
resumes a paused print job. W hen the printer is offline,
selects the displayed menu item.