Avery Dennison Monarch 9855 Operator Handbook - Manual (Page 76)

6-14 Operator's Handbook
U s i n g F l a sh M em o r y
The flash memory options are listed in the table below.
Option Choices Default
Form at Flash No/Yes No
Unused Flash NA NA
Pack Flash No/Yes No
Forma tting Flas h Memory
Before storing packets in flash memory, downloading a script, or if the
printer's firmware is updated, you must format the flash memory.
Formatting flash memory is only required once during initial printer
setup.
Note: When you format flash memory, the script and any downloaded
TrueType® fonts saved in the printer's flash memory are deleted and
must be resent to the printer.
To format flash memory, from the Main Menu, select Setup. Then, follow
these steps.
1. Press  or  until you see
SETUP
 Flash Memory 
2. Press Enter/Pause.
FLASH MEMORY
Form at Flash 
3. Press Enter/Pause.
Are you sure?
No 
4. Press  to display "Yes" and press Enter/Pause.