Avery Dennison Monarch 9855 Operator Handbook - Manual (Page 33)

Loading Ribbon 3-5
High Energ y Ribbon Limitations
When using the high energy ribbon option:
♦ Use a print speed of 2.5IPS (inches per second).
♦ Printhead warranty is reduced to 100,000 inches.
♦ Serial bar codes cannot be printed.
♦ Do not use peel mode.
♦ No more than 20% of the supply should have print (black coverage).
CAUTION: The high energy ribbon may break or stick to the supply when
more than 20% of the supply contains print.
♦ Only white high energy supply should be used for bar code printing.
♦ Reverse fonts cannot be used.
♦ A non-printing area of at least .1 inch (2.54 mm) must exist on the left
and right edge of the ribbon.
♦ Do not print horizontal lines or bars.
♦ Graphics are limited.