Avery Dennison Monarch 9855 Operator Handbook - Manual (Page 91)

Printing 8-3
P au s i n g a B at ch
You can pause printing by pressing Enter/Pause. You may want to interrupt
a batch to make adjustments for:
♦ Loading a different roll of supply or a ribbon. See Chapter 2, "Loading
Supplies" or Chapter 3, "Loading Ribbon" for more information.
♦ Adjusting the supply position or contrast using the Setup menu. See
Chapter 4, "Setting Supply Options" for more information.
When you press Enter/Pause you will see
PAUSE MENU
 Print Mode 
You can press Enter/Pause to resume printing or press  or  to display
the Pause Menu options.
The following chart shows the Pause Menu options.
P ause M enu
Cancel
Batch
Cancel
All
Print
Mode
Restart
Batch
R e s t a rt i n g a B at c h
You can reprint a paused batch from the beginning (using the original
quantity).
1. When you press Enter/Pause, you will see
PAUSE MENU
 Print Mode 
2. Press  or  until you see
PAUSE MENU
 Restart Batch 
3. Press Enter/Pause. The batch starts printing from the beginning.