Beisler 1220-4 - Manual (Page 11)

Chapter 2: Preliminary remarks
Page 2-3
2.3 Guarantee regulations
We guarantee the fault-free functioning of the Automatic Single Head
Serging Unit, Series 1220/4 according to this operating manual except
the tools for a time range of six months after delivery. If the machine is
used in double- or triple-shift operation, the term of guarantee is
reduced to three or two months.
The term of guarantee starts with the date of delivery to the customer,
independant from the time of putting into operation. Guarantee will be
spoiled, if the machine isn’t installed and operated according to this
operating manual and the regulations given by the Beisler GmbH staff.
A cost-free repair is only possible, if all regulations considering
storage, transportation and putting into operations have been obeyed.
Customers and third persons may only mesh with the machine after
getting a written approval by the Beisler GmbH. The Beisler GmbH
takes no responsibility for injuries and damages arising from non-
obeyance of this stipulation. All warranty will be spoiled in this case.
The Beisler GmbH takes no responsibility for faults of the machine as
consequence of defective or functional faulty equipment in the
surrounding of the machine or by the use of accessoires, which were
not delivered by the Beisler GmbH.
The general conditions of sale and delivery of the Beisler GmbH are
valid.