Beisler 1220-4 - Manual (Page 4)

Operating manual Automatic single head serging unit 1220/4
Page 0-2 © Beisler GmbH, Hösbach
6.3 Create own programs 6-5
6.3.1 Enter machine code 6-6
6.3.2 Set language 6-6
6.3.3 Adjust setup data 6-6
6.3.4 Use of the storage module 6-13
6.4 Height adjustment of the contour guiding 6-17
6.5 Short operating instructions for the
sewing head
6-18
6.5.1 Adjust height of needle pole 6-18
6.5.2 Distance of the left grab to the needle 6-20
6.5.3 Distance of the right grab to the needle 6-22
6.5.4 Rear needle protection 6-24
6.5.5 Front needle protection 6-26
6.5.6 Position of the transporter 6-28
6.5.7 Transporter height 6-29
6.5.8 Stroke of the presser foot 6-30
6.5.9 Presser foot 6-32
6.5.10 Upper knife 6-34
6.5.11 Bottom knife 6-35
6.5.12 Thread regulation for ‘Überwendlich’ grab 6-36
6.5.13 Oil filter changing
6-37
6.5.14 Oil changing 6-38
7 Cleaning and maintenance 7-1
7.1 Maintenance of the machine 7-1
7.1.1 Water separator at air connector 7-2
7.1.2 Oil level in the sewing head 7-2
7.1.3 Check the drive belt 7-3
7.2 Required cleanings 7-3