Beisler 1220-4 - Manual (Page 44)

Operating manual Automatic single head serging unit 1220/4
Page 6-20 © Beisler GmbH, Hösbach
4. Loosen screw (3) until the needle pole can be pushed hardly
only.
5. Push the needle pole that the distance between needle top
and stitch plate is 9.7 to 9.9 mm.
6. Tighten screw (3) in this position.
7. Fix the cover (2) again.
6.5.2 Distance of the left grab to the needle
Pict. 15 Distance of the left grab (1)
Pict. 16 Distance of the left grab (2)