Beisler 1220-4 - Manual (Page 33)

Chapter 6: Operation
Page 6-9
Set motor parameters:
š Mark the symbol „Motor parameters“ .
š Press the
key until the following will be displayed:
Pull: 75
5400
[ 4500]
MAX.: 8000
MIN.: 400
DEC.
80%
ACC.
100%
RESET
ON
SETUP-02
67
š Use the
keys to mark the different values in
the window.
š Use the
keys to adjust the desired values:
RESET must be set to ‘ON’.
MIN.: minimum revs of the sewing head; 400 is the optimized
value.
MAX.: maximum revs of the sewing head:
Pegasus S52:
8000
PUL.: mounted belt drive disc size; must be set to ‘75’
ACC.: acceleration curve; must be set to ‘100%’
DEC.: decrease parameter: must be set to 80%
KP: add. motor break; must be set to 16
š Press the
key to close the page.