Beisler 1220-4 - Manual (Page 9)

Chapter 2: Preliminary remarks
Page 2-1
2 Preliminary remarks
2.1 Introduction
This operating manual adresses to the operator of the machine, that is
the person that works with the machine. It is not a technical manual.
Please ask questions exceeding the contents of this operating manual
to our service staff.
ATTENTION
All service and maintenance duties at this machine may only be carried
out by qualified staff (qualified electrical employee or electro-
technical instructed person according to IEC 364 and DIN EN 60204-
1). Machine operation may only be carried out by an instructed person,
who had read and understood this operating manual completely.
ATTENTION
Any structural changes to the machine, either electrically,
mechanically or regarding the machine control, are suspect to the
responsibility of the machine owner.
The following documents are part of the documentation of the
Automatic single head serging unit 1220/4:
1. Electrical wiring pans
2. Parts list
3. Operating manual of the sewing head
Please check the documents delivered with the machine for
completeness.