Beisler 1220-4 - Manual (Page 24)

Operating manual Automatic single head serging unit 1220/4
Page 5-4 © Beisler GmbH, Hösbach
DANGER
Danger to life from unsufficient grounding! Do a grounding according
to DIN EN 60204-1.
5.3 First putting into operation
This machine has been configured to the individual requirements of
the customer. The first putting into operation can be done easily:
1. Adjust the machine to a horizontal stand.
2. Connect power and air supply.
3. Switch on the machine using the mains / emergency stop
switch at the front side of the machine.
4. Check all security systems for function and efficiency.
DANGER
The machine may only be used for production purposes, after the
security systems have been checked. If a security doesn’t work
adequately, it must be repaired first.
As a factory setting, several production programs are contained in the
buffer of the machine. You may use one of them or create your own
programs.