Beisler 1220-4 - Manual (Page 34)

Operating manual Automatic single head serging unit 1220/4
Page 6-10 © Beisler GmbH, Hösbach
6.3.3.3 Page -03: Machine functions
After entering the machine code, press three times, until setup
page -03 is displayed:
-03
SETUP
A
S
Here you can edit several functions of the machine. Only four of them
are relevant for this machine:
Presser foot lifting:
Here, several time and voltage values for the
lifting, holding and lowering of the presser foot
can be adjusted.
Light barrier (Photo cell mode):
Here you can adjust several options for the
light barrier.
To adjust one of the machine functions, select the desired symbol
using the keys. In the drawing shown above, the symbol
‘Presser foot lifting’ is selected. Now press the key to open the
settings of the selected machine function.
Adjust presser foot lifting:
After selecting the symbol of the presser foot lifting and opening the
adjustment page, the following will be displayed: