Beisler 1220-4 - Manual (Page 16)

Operating manual Automatic single head serging unit 1220/4
Page 3-2 © Beisler GmbH, Hösbach
B
A
C
Pict. 2 Available security systems
A Main switch B Motor overload protection
switch
3.1.1 Main switch
The main switch is located at the front side of the machine below the
working table. It is used to cut off the machine’s power supply.
3.1.2 Overload protection switch
If the motor is overloaded, the automatic protection switch reacts and
stops the sewing process. Check and repair the reason for the
overloading and put the machine into the starting position then.