Switching from fanfold paper to asf – Compuprint 4051 User Manual
Page 113
Options
107
Switching From Fanfold Paper to ASF
If you have been using fanfold paper and the printer receives a command to load a cut sheet
through the Automatic Sheet Feeder:
1. Park the fanfold paper: press the
SHIFT
key and then the
PARK
key to enable the PARK
function, the message Parking paper will be displayed.
2. Place the drive selection lever in the cut sheet position. Press the
ON LINE
key.
Inserting Manual Cut Sheets Without Removing the ASF
Follow the sequence:
• Open the paper bins.
• Make sure that the printer is disabled to
print.
• Insert the cut sheet in the entry slot in
front of the first bin until it stops against
the platen. Perform the paper loading
procedure as explained before in
“
” section.
• Whenever you wish to enable again the
ASF loading, stack the paper in the bins
and close them.