Compuprint 4051 User Manual
Page 18
Setting Up Your Printer
12
8. Replace the printer cover by first inserting
the hooks (1) into the appropriate grooves
(2) and then lower the cover ensuring that
clicks in place.
• If your printer is the 4051N plus or the
4056N plus model, simply lower the
printer cover to close it.
9. Move the paper thickness lever according to the paper type:
• If a cut sheet is loaded move the lever
towards the back of the printer.
• If a multicopy-chemical paper is
loaded, first move the lever completely
towards the back of the printer, then 1
notch towards the front of the printer
for each copy.
• If a carbon multicopy-paper is loaded,
first move the lever completely
towards the back of the printer, then 2
notches towards the front of the
printer for each copy.
Now, you can load the paper and print your first test document, see “
the pattern does not satisfy your expectation, adjust the paper thickness lever again.
When printing on multicopy-paper follow the above instructions to avoid damaging the print head.