Compuprint 4051 - Manual (Page 70)

Printer Setups
64
Top of Form (ToF)
BIDI. ALIGNMENT
↑
TOP OF FORM → or ← 0/72 inches (4051/4051N plus models) ↑ or ↓
↓
0/90 inches (4056/4056N plus models) ↑ or ↓
TEAR PERFO ALIGN
... ↑ or ↓
792/72 inches (4051/4051N plus models)
↑ or ↓
990/90 inches (4056/4056N plus models) ↑ or ↓
This function adjusts the top of the form in n/72 inch (4051/4051N plus models) or n/90 inch
(4056/4056N plus models). The values range between 0 and 792 (4051/4051N plus models) or
between 0 and 990 (4056/4056N plus models). At value selection level, the printer prints a
**x/72** string (4051/4051N plus models) or a **x/90** string (4056/4056N plus models), where
the x value indicates the current value corresponding to the current ToF position. If the value is
changed, the new value will be printed from its corresponding ToF position.
See “Top of Form Adjustment” later in this manual.