Compuprint 4051 - Manual (Page 49)

Printer Setups
43
LF=LF+CR
If the printer receives a LF code, it performs a line feed followed by a carriage return. If
the printer receives a CR code, it only performs a carriage return.
LF&CR=LF+CR
If the printer receives a LF code or a CR code, it performs both a line feed and a
carriage return.
Tear/View Mode
LINE MODE
↑
TEAR/VIEW MODE → or ← Auto.advance 1s (*) ↑ or ↓
↓
... ↑ or ↓
LANGUAGE
Auto.advance 5s ↑ or ↓
Manual advance ↑ or ↓
No tear ↑ or ↓
Auto.advance 1s ... 5s Paper moves automatically to the tear/view position after the specified time-
out (1s. to 5s.)
Manual advance
Paper moves to the tear/view position using the ON LINE key.
No tear
Tear/view mode is disabled. It is useful to print labels or paper that backward
movements may cause a paper jam.