Compuprint 4051 - Manual (Page 20)

Setting Up Your Printer
14
2. Flex the paper chute towards the front of
the printer and insert the hook on the
opposite side of the paper chute in the
corresponding groove.
This printer accessory may assume two
different positions according to the paper
type: down position for fanfold paper (A) and
raised position for cut sheet (B).
3. If you wish to position the paper chute
down, lift it towards the back of the printer
and push it gently down until it stops. If you
wish to place the paper chute in the raised
position, lift it and hook it firmly.