Compuprint 4051 - Manual (Page 63)

Printer Setups
57
Vertical Spacing
DRAFT MODE
↑
VERTICAL PITCH → or ← 6 lpi (*) ↑ or ↓
↓
... ↑ or ↓
LPI LOCK
12 lpi ↑ or ↓
3 lp/30 mm ↑ or ↓
... ↑ or ↓
12 lp/30 mm ↑ or ↓
This function determines the density with which the lines are printed according to different
units: lines printed per inch (6, 8, 12 lpi) or lines per 30 mm (3, 4, 6, 8, 12 lp/30 mm).
Lpi Lock
VERTICAL PITCH
↑
LPI LOCK → or ← Enabled ↑ or ↓
↓
Disabled (*) ↑ or ↓
FORM LENGTH
Enabled Vertical spacing can be changed only by the operator panel keys.
Disabled Vertical spacing can be changed by software or by operator panel keys.