Compuprint 4051 User Manual
Page 29
Configuring the Printer
23
Buffer cleared
Displayed after input buffer clearing (all the stored data are erased).
Call Service
Displayed in rolling mode together with the failure message to
indicate a call to Service.
Carriage error
Displayed when there is an unrecoverable carriage error. This means
that the printer carriage does not move correctly. When the
Carriage error
message is displayed, the indicator
READY
blinks.
Check that the ribbon cartridge is not used up neither damaged.
Check connection
Displayed when a DSR, DCD, or CTS signal fault occurs.
Check interface
Displayed when an Input buffer overflow occurs
Check its moving
Displayed when a carriage fault occurs.
Check line
Displayed when a communication error occurs.
Comm. failure
Displayed when a communication error occurs
Data lost
Displayed when an input buffer overflow occurs.
Enable path FF
This message appears on the display immediately after switching
Manual
path to Fanfold path. Place the drive selection lever in the
fanfold position.
Enable path SS
This message appears on the display immediately after switching
Fanfold
path to Manual path. Place the drive selection lever in the
single sheet position.
Fanfold
This is one of the messages that will be displayed when you press
PATH
(Shift function). Press the
SHIFT
key to select the fanfold paper
path.