Compuprint 4051 - Manual (Page 71)

Printer Setups
65
Tear Position Alignment
TOP OF FORM
↑
TEAR PERFO ALIGN → or ← 0/72 inches (4051/4051N plus models) ↑ or ↓
↓
0/90 inches (4056/4056N plus models) ↑ or ↓
BIDI. ALIGNMENT
... ↑ or ↓
36/72 inches (4051/4051N plus models)
↑ or ↓
45/90 inches ( 4056/4056N plus models) ↑ or ↓
This function adjusts the tear off position in n/72 inch (4051/4051N plus models) or n/90 inch
(4056/4056N plus models). The values range between -36 and 36 (4051/4051N plus models) or
between -45 and 45 (4056/4056N plus models). At value selection level, the tear off line position
aligns to the corresponding tear off border of the printer cover. Pressing the
↑ or ↓ keys, the tear
off position moves in steps of 1/72 inch (4051/4051N plus models) or 1/90 inch (4056/4056N plus
models). When the tear off perforation line is set in the desired position, selects this value.
See “Tear Off Line Adjustment” later in this manual.