Compuprint 4247-L03 Programmer Manua - Manual (Page 17)

Chapter 1. Command Summary in Alphabetical Order
This section contains a summary of commands used on the 4247-L03 model printer. It is divided into 2
separate sections. “Common commands for the 4247-L03 model printers” lists all the commands common
to both the Single Byte Character Set (SBCS) and Double Byte Character Set (DBCS) features.
“Commands for the 4247 model printer with the DBCS feature present” on page 5 lists commands that can
only be used when the DBCS feature is present.
Common commands for the 4247-L03 model printers
The following commands are common for both of the 4247-L03 model printers.
Command Description Page
BEL Buzzer (IBM/EPSON). 45
BEL Bell (ANSI). 79
BS Print and space back one position (IBM/EPSON). 45
BS Back space (ANSI). 72
CAN Cancels line. (EPSON) 43
CAN Cancels data. (IBM) 43
CR Prints all received data and the column counter is set to the left margin (IBM/EPSON). 7
CR Carriage return (ANSI). 72
DC1 Selects printer. (IBM) 43
DC1 Selects printer. (EPSON) 43
DC1 Selects printer (Data Control 1) (ANSI). 78
DC2 Sets 10 cpi printing. (IBM) 19
DC2 Cancels compressed printing. (EPSON) 19
DC3 Deselects printer. (EPSON) 43
DC3 Deselects printer (Data Control 3) (ANSI). 79
DC4 Cancels double width printing (IBM/EPSON). 19
DC4 DC4 ESC ! Bar Code Selection. 54
DC4 DC4 ESC (GS Prints bar code symbols. 61
DC4 DC4 ESC @ Re-initializes the printer. 62
DC4 DC4 ESC 1 Sets vertical spacing n/180 inch. 51
DC4 DC4 ESC 3 1 Sets vertical spacing 12 lines/30 mm. 51
DC4 DC4 ESC 3 3 Sets vertical spacing to 3 lines/30 mm. 51
DC4 DC4 ESC 3 4 Sets vertical spacing 4 lines/30 mm. 51
DC4 DC4 ESC 3 6 Sets vertical spacing 6 lines/30 mm. 52
DC4 DC4 ESC 3 8 Sets vertical spacing 8 lines/30 mm. 52
DC4 DC4 ESC A Sets the horizontal spacing to 15, 17.1, 20, 24 CPI. 52
DC4 DC4 ESC D Sends the operator panel messages to the serial I/F. 65
DC4 DC4 ESC v Selects graphics print speed. 65
DC4 DC4 ESC g Selects LQ fonts. 53
DC4 DC4 ESC J Sets amplification factor. 62
DC4 DC4 ESC N Selects/loads or parks the fanfold from the Front 2 path. 62
DC4 DC4 ESC p Sets quality printing. 62
DC4 DC4 ESC R String rotation. 63
DC4 DC4 ESC r Digit rotation. 63
DC4 DC4 ESC S Selects character set ISO Character Sets or Code Pages. 53
DC4 DC4 ESC T Selects/loads or parks the fanfold from the Front1 path. 63
DC4 DC4 ESC u Selects the user macros. 64
DC4 DC4 ESC v Selects graphics print speed. 65
DC4 DC4 ESC Y Selects emulation. 64
DC4 DC4 ESC Z Makes AGA in column. 64
DEL Deletes the last character. (EPSON) 44
1