Compuprint 4247-L03 Programmer Manua - Manual (Page 180)

IP Address Assignment
Fixed: Assigns the static or fixed IP address.
DHCP: Assigns the dynamic IP address (DHCP protocol).
Default value is Fixed.
IP Address
These values set the IP Address. The address is represented by a decimal notation where the decimal values are
divided by points in four fields.
Each field ranges between 0 and 255.
Default is 127.000.000.000.
Subnet Mask
These values set the Subnet Mask number. This number is represented by a decimal notation where the decimal
values are divided by points in four fields. Each field ranges between 0 and 255.
Default is 255.255.254.000.
Default Gateway
These values set the Default Gateway address. This address is represented by a decimal notation where the decimal
values are divided by points in four fields. Each field ranges between 0 and 255.
Default is 000.000.000.000.
Host Name
The host is identified by a name in the NetBIOS protocol over TCP/IP. This function allows creating the name of the
host using a 14-character string.
Default is 4247_xxxxxx where xxxxxx are the last 6-digits of the MAC address...
Workgroup Name
The workgroup is identified by a name in the NetBIOS protocol over TCP/IP in Windows ® . This function allows creating
the name of the workgroup using a 14-character string.
Default is Workgroup.
SMTP Service
Disabled: Disables the SMTP (Simple Mail Transfer Protocol) service, that is disables the reception/transfer/error
service of the e-mail.
Enabled: Enables the SMTP service, that is enables the reception/transfer/error service of the e-mail.
Default is Disabled.
Mail Server Address
These values set the mail server address. This number is represented by a decimal notation where the decimal values
are divided by points in four fields. Each field ranges between 0 and 255.
Default is 000.000.000.000.
Note: Item selection on the printer menu allowed only if the “SMTP Service” function choice is Enabled.
E-mail Address (Receiver)
This function allows writing the e-mail address where you can notify the failures using a 48-character string. Default is
an empty string.
Note: Item selection on the printer menu allowed only if the “SMTP Service” function choice is Enabled.
E-mail Address (Sender)
This function allows to write the sender e-mail address using a 48-character string.
Default is an empty string.
Note: Item selection on the printer menu allowed only if the “SMTP Service” function choice is Enabled.
Location
You can enter the physical location of the printer into this field.
164 Programmer Manual