Data input control, Can can dc1 dc1 dc3, Cancels line. (epson) – Compuprint 4247-L03 Programmer Manua User Manual
Page 59: Cancels data. (ibm), Selects printer. (ibm), Selects printer. (epson), Deselects printer. (epson), Data input control can
Data Input Control
CAN
Cancels line. (EPSON)
ASCII Code
CAN
Hexadecimal Value
X'18'
Decimal Value
24
This code clears all printable characters and bit-image graphics on the current line. This code moves the
print position to the left-margin position.
CAN
Cancels data. (IBM)
ASCII Code
CAN
Hexadecimal Value
X'18'
Decimal Value
24
This code clears all data stored in the preceding print buffer but does not change the current print position.
DC1
Selects printer. (IBM)
ASCII Code
DC1
Hexadecimal Value
X'11'
Decimal Value
17
This command causes the printer to be enabled after it has been disabled by the ESC Q command.
DC1
Selects printer. (EPSON)
ASCII Code
DC1
Hexadecimal Value
X'11'
Decimal Value
17
This command causes the printer to be enabled after it has been disabled by the DC3 command.
DC3
Deselects printer. (EPSON)
ASCII Code
DC3
Hexadecimal Value
X'13'
Decimal Value
19
This code deselects the printer. The printer remains deselected until it receives a DC1 command or power
is turned off then on again. The printer ignores the ESC @ command (initialize printer) when it is
deselected.
Chapter 2. EPSON/IBM Mode
43