Compuprint 4247-L03 Programmer Manua - Manual (Page 50)

ESC k
Selects the LQ fonts. (EPSON)
ASCII Code ESC k n
Hexadecimal Value X'1B' X'6B' n
Decimal Value 27 107 n
Selects one of the available fonts in Letter Quality. If Draft mode is selected when this command is sent,
the new LQ font is selected when the printer returns to LQ printing.
A boldface font is available if the command ESC p1 (proportional) is sent.
n Types n Types
1 Gothic 6 OCR-A
2 Courier 7 Presenter
3 Prestige 11 Boldface proportional
4 Script 12 Block Char.
5 OCR-B
ESC R
Selects Nation character set. (EPSON)
ASCII Code ESC R n
Hexadecimal Value X'1B' X'52' n
Decimal Value 27 82 n
Range 0 ≤ n ≤ 13
This code causes the national character set to be selected according to the parameter n. See the following
table:
n National Character Sets n National Character Sets
0 USA 8 Japan
1 France 9 Norway
2 Germany 10 Denmark-II
3 United Kingdom 11 Spain-II
4 Denmark-I 12 Latin America
5 Sweden 13 French Canadian
6 Italy 14 Latin America-II
7 Spain-I
ESC t
Selects characters table. (EPSON)
ASCII Code ESC t n
Hexadecimal Value X'1B' X'74' n
Decimal Value 27 116 n
34 Programmer Manual