Compuprint 4247-L03 Programmer Manua - Manual (Page 21)

Commands for the 4247 model printer with the DBCS feature present
The following commands are used only with the 4247 model printer with the DBCS feature present.
Command Description Page
ESC │ n Sets – Resets double width and double height print modes. 96
ESC ( X n1 n2 a1 a2 a3 Defines a special printing effect. 96
FS & Enter the DBCS print mode. 89
FS . Exit the DBCS print mode. 89
FS ! n Sets multiple print attribute at once. 94
FS - n Sets - Resets underline mode. 91
FS 2 a 1 a 2 n 1 ... n 72 Sets user-defined character (DownLoading). 94
FS b n Sets the DBCS standard line. 95
FS c nl nh Sets the HMI (Horizontal Motion Index) 95
FS D d1 d2 Composes two half-width, rotated characters into a normal size rotated character
space. 91
FS DC2 Cancels half-sized and 1/4-sized print and restores normal size print. 93
FS DC4 Resets double width mode. 90
FS J Sets 90 degrees counterclockwise character rotation. 90
FS K Resets character rotation. 91
FS S n1 n2 Defines the left and right empty character space of a normal-sized character. 92
FS SI Sets the print of half-sized characters. 93
FS SO Sets double width mode. 90
FS r n Sets superscript or subscript print mode (1/4 normal size). 93
FS T n1 n2 Defines the left and right empty character space of a half-sized character. 92
FS U Define half-sized character as half of a normal sized character. 92
FS v n Sets - Cancels line drawing character connection mode. 95
FS V Resets print of half-sized characters. 93
FS W n Sets - Resets quadruple print mode. 90
FS x n Sets print quality level for the DBCS font set. 94
Chapter 1. Command Summary in Alphabetical Order 5