Compuprint 4247-L03 Programmer Manua - Manual (Page 90)

ESC H or HTS
Horizontal tab setting.
ASCII Code ESC H or HTS
Hexadecimal Value X'1B' X'48' (7-bit) or X'88' (8-bit)
Decimal Value 27 72 (7-bit) or 136 (8-bit)
This command causes a horizontal tab stop to be set to the decipoint value of the current print position.
ESC [ p
1
; p
n
u
Sets horizontal tab stops at specified positions multiple horizontal tab set (HTS).
ASCII Code ESC [ p
1
; p
n
u
Hexadecimal Value X'1B' X'5B' p
1
X'3B' p
n
X'75'
Decimal Value 27 91 p
1
59 p
n
117
This command sets up to 22 horizontal tab stops at each decipoint position specified by p parameters.
When specifying more than one position, enter the parameters in ascending order.
Vertical Movements
LF
Line feed.
ASCII Code LF
Hexadecimal Value X'0A'
Decimal Value 10
This code positions the paper one line space as indicated by the current line spacing value.
ESC D or IND
Index.
ASCII Code ESC D or IND
Hexadecimal Value X'1B' X'44' (7-bit) or X'84' (8-bit)
Decimal Value 27 68 (7-bit) or 132 (8-bit)
This command causes the paper to be positioned down one line space as indicated by the current line
spacing value.
ESC E or NEL
Next line.
ASCII Code ESC E or NEL
Hexadecimal Value X'1B' X'45' (7-bit) or X'85' (8-bit)
Decimal Value 27 69 (7-bit) or 133 (8-bit)
This command causes the paper to be positioned down one line space as indicated by the current line
spacing value. The column counter is reset to the left margin value.
74 Programmer Manual