Comtech EF Data CRS-500 - Manual (Page 115)

CRS-500 1:N Redundancy System Revision 2
Configuring Modems for 1:N Redundancy MN-CRS500
6–5
6.6 Completing Modem Configuration
As outlined in Chapter 2. INITIAL START-UP AND CONFIGURATION CHECK LISTS,
once you successfully configure all modems for 1:N redundancy, the CRS-500 1:N
Redundancy System is now ready to assume normal operations.
Further information is provided in the following chapters:
• Chapter 7. CSU FRONT PANEL OPERATION
• Chapter 8. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT (for SNMP,
Telnet, and Web Server operation)
• Chapter 9. SERIAL-BASED REMOTE PRODUCT MANAGEMENT (for serial
remote control operation)