4 terminal port emulation, 1 programming steps – Comtech EF Data RCS20 User Manual
Page 67
RCS20 M:N Redundancy Switch
Revision 15
User Interfaces
MN-RCS20 and CD-RCS20
4–33
4.3.2.4 TERMINAL PORT EMULATION
This subscreen allows the user to modify the RCS20 terminal port terminal emulation.
4.3.2.4.1 Programming steps:
1. Press <ADDS VP>, <VT 100>, or <WYSE 50> to select the desired terminal port emulation type.
The switch parameter table will be updated immediately.
2. Press <CLR> or <NEXT> to abort programming (no switch parameters changed).
Key
Label
Function
S1
ADDS VP Selects ADDS VP as Term Emulation
S2
VT 100
Selects VT100 as Term Emulation.
S3
WYSE 50 Selects WYSESO as Term Emulation.
S4
RETURN Press to cycle back to the TERMINAL PORT CONFIGURATION Screen
Numeric Keypad ---
Press <CLR> to abort programming.
TERMINAL PORT EMULATION
TERMINAL EMULATING:
VT100
ADDS VP VT100 WYSESO RETURN