Comtech EF Data RCS20 - Manual (Page 96)

RCS20 M:N Redundancy Switch Revision 15
User Interfaces MN-RCS20 and CD-RCS20
4–62
4.3.4.4 LAMP TEST
This screen allows the user to test all LED lamps on the front panel of the RCU20 for five seconds.
Key Label Function
S1 START Press to start test.
S2 --- N/A
S3 --- N/A
S4 RETURN Press to cycle back to the SWITCH SYSTEM TESTS Screen.
Numeric Keypad --- N/A
4.3.4.5 SWITCH SYSTEM TESTS Screen 2
REMOTE PORT TEST - the unit sends the ASCII characters ‘TEST’ to the remote port to test
communications.
Key Label Function
S1 REMOTE Press to cycle to the REMOTE PORT TEST Screen.
S2 PARM N/A
S3 LAMP N/A
S4 NEXT Press to cycle to the next screen.
Numeric Keypad --- N/A
LAMP TEST
PRESS THE ‘START SOFTKEY TO ILLUMINATE
ALL FRONT PANEL LEDS FOR 5 SECONDS.
<START> RETURN
SWITCH SYSTEM TESTS
REMOTE PORT TEST
REMOTE NEXT