Comtech EF Data turboIP v4.0 User Manual
Page 103
turboIPv4.0
Revision 6
Sample Configuration
MN/TURBOIP.IOM
7-5
The following table defines the configuration settings for each turboIP.
Configuration Parameter
Hub turboIP
Remote turboIP (1 & 2)
WAN Transmission Rate
15 Mbps (equal to the total
TX data rates of Hub
modems, 8 + 5 + 2 Mbps)
1 Mbps (equal to the TX data
rate of Remote modem.
Congestion Control
Rate Pacing
Rate Pacing
Selective Acceleration
Selective Acceleration Rules
are required to limit the
bandwidth for all of the traffic
destined for a particular
Remote site. The BW limit
would be equal to the TX data
rate of Hub modem that is
linked to the particular site 8
Mbps for Site 1, 5 Mbps for
Site 2, and 2 Mbps for Site 3.
No Selective Acceleration
Rules are required. Rules
could be added to prioritize or
set BW limits on types of
traffic.
Route Table
No Route Table entries are required. Routes could be added
to allow remote access from outside of LAN subnet.